X Tango - Xtreme Temp Suppressor Cover
X Tango - Xtreme Temp Suppressor Cover
X Tango - Xtreme Temp Suppressor Cover
X Tango - Xtreme Temp Suppressor Cover

X Tango - Xtreme Temp Suppressor Cover

$90.00
$90.00
Shipping calculated at checkout.
  • Low stock!
  • Inventory on the way
Size: 7" (7.31" - 8.3" Total Suppressor Length)
Details & Care

Details & Care

Cordura/Nylon Products

- Do not machine wash, use bleach, or use fabric softener on Cordura products.

- Use cold or lukewarm water, mild detergent, and lightly scrub the material with a sponge or soft scrub brush.

- Air dry out of direct sunlight to prevent color fading. DO NOT iron or dry clean.

- Once dry, apply a DWR (durable water repellent) spray to mantain the products ability to shed water.

- Any loose threads from wear and wash should be burned and sealed with a lighter. DO NOT apply flame directly to spacer mesh, Cordura, or other Nylon fabrics. These fabrics will melt and create holes in the product.

Fleece Fabrics

- Machine wash warm or cold and tumble dry low with mild detergent. Fleece products can also be air dried. DO NOT use bleach or fabric softener. DO NOT iron or dry clean.

Description

The X Tango Suppressor Cover is our newest edition to the T & K Suppressor Cover family. This cover is specifically designed for extreme temperature use, which means it can handle high rates of fire for both military and civilian use. The X Tango can withstand temperatures up to 1000° F without melting or being damaged. Constructed of laser cut fiberglass fabric, carbon fiber, and Kevlar nano cord. A fiberglass fire sleeve with a silicone rubber external coating can be added for an additional cost, but is not a requirement to operate this cover at high temperatures. Our suppressor cover has a rear cinch design to prevent the cover from slipping forward while shooting. 1" Kevlar webbing wraps through specific laser cut slots to tighten the cover around the fire sleeve (the barber pole). Several metal 1" triglides are used to cinch the webbing tight and prevent any webbing slippage. This is a great piece of gear to protect your can from the elements, protect yourself from burns, and reducing the mirage, which is an optical phenomenon in which light rays bend via refraction to produce a displaced image of a distant object. This is extremely important for round accuracy on target at distance.

Fitment: Measure your suppressors total length and follow the instructions on the size dropdown. The end of your suppressor should be exposed with the cover on (1/4" - 1"). If you have overhang, you will need to exchange your cover for the next size down. Allowing the end of your suppressor to be expose will allow gases to dissipate and avoids damaging the cover.

Warranty Information: Intentional destruction of this product will void the warranty. The X Tango is rated for high rates of fire / high temperature operation.

Heat Specifications

Fiberglass Fabric - 1000° F and remains stable at 1500° F

Kevlar Webbing - 800° F (does not melt)

Carbon fiber sleeve - 1800° F max temperature before melt/failure

Fiberglass fire sleeve add on - 500° F continuous / 2200°F up to 15 Minutes / 3000°F for short excursions

Warning: This product contains fiberglass. Use gloves when handling this product. Avoid direct contact with skin to avoid irritation. Always wash your hands after handling. Metal components can and will retain heat. Use caution when handling this product after shooting. Allow your firearm to cool down before attempting to manipulate any components .

PRODUCT MATERIAL SPECIFICATIONS:

Made in USA Fiberglass Fabric 

Made in USA Kevlar Webbing

Made in USA Carbon Fiber

Made in USA Kevlar Nano Cord

Made in USA 1 Metal Triglides

Made in USA Cord Lock

Made in USA Nomex Thread

Recently viewed products

Continue where you left off